This Little Floor Of Mine

My next big project after the "completion" of the kitchen was the mud room, aka dog room.  My mom said I was going to an awful lot of trouble for a room just for dogs.  In retrospect, I think I agree with her...

This is a smallish (8x13) room off of the back bedroom.  Kind of a an odd location, but we were told that our house was once a duplex and that might have been one side's kitchen since there is a large sink there.  The walls were a yucky off white and the trim was an even yuckier brown color.  The floor, well, the floor was a mess.  It was a brown print linoleum that was peeling in some areas and just missing in others.  The floors slope to the back corner, the walls were cracking and the sink was a  leaky mess.  I didn't want to spend much time in there, much less make our dogs spend their time in there.  So, the project began.

Isn't she lovely??

the beautiful peeling floor



Our 'junk' room

I do love a good sink
The very first thing I had to do - call the plumber!  The sink drain was in bad shape, so bad, it was split open.  And the plumbing under the house was in even worse shape, it was old clay pipes that had cracked years ago.  This was the most expensive thing I did and I still shutter a bit when I think about it.  But to have the plumber completely replace all the plumbing lines under the sink and in the crawlspace was a whopping $820....but no leaks!


that's not gonna work

this is the crawlspace directly under the mudroom

old, old, pipes



My initial plan was to paint the trim and walls, fix the sink and tile the floor.  Oh, and I forgot to mention that during our kitchen reno we had the crew put in 2 new windows for us in the mudroom and install a 'dutch' door.  Oh, second thing I forgot to mention - I planned to get this all done while the other half was away for three months.....while I'm a single parent....I wanted to renovate a room....did I mention solo??? Was I crazy? Probably, but hey, Nicole Curtis from Rehab Addict can do it, why can't I?

To Do List
1. Remove old flooring
2. Install new subfloor
3. Install tile
4. Paint trim
5. Paint walls
6. fix sink

I didn't even get passed number 1.  I spoke to my cousin (Angie - crime partner in thrifting - who also does contract work) and she thought the flooring might have asbestos and suggested I put the plywood directly on top of the linoleum.  Done.  I pulled up the old tac strips holding the linoleum down and use shims to even out the floor a more than it was.  I really wanted to tile the floor, but the tiles I wanted were out of my price range....I was crushing hard on the concrete tiles in black and white....

Source
Then again, my cousin Angie had a solution.  Paint the plywood floor...hm, I do love the look of a painted floor, but I'm too scared to actually paint real wood floors.  So why not make the plywood look like real wood floors.  Plus, if I ever did tile, I could still use the plywood as my subfloor.

Source

Off to Lowe's (or Home Depot, I don't remember), I bought 3 sheets of a higher grade plywood floor that was 1/2" thick, I made sure it was sanded already on one side since I was using it as my actual flooring.  I also had the big box lumber store cut the plywood into 6" and 8" strips for me.  Yes, I could have done this, I do have a table saw, but why when it's cheep/free for them to do it?  Big Bonus - it's easier to transport cut up too!



I brought it home and with the help of my gracious mother, we sanded the strips even more, just to take off any potential splinters.  The room was narrow enough that one strip of plywood would go from end to end and I would only have to trim it a few inches to make it fit.

Once all the plywood had been sanded and cut to size, I used my crown stapler to nail the boards down directly onto the linoleum floor.  We used a few pennies as spacers and it went relatively quick.







Once all the boards were nailed down, we decided to paint to the walls.  I used the same gray color that is most of the rest of the house.  And the trim was just your basic white trim paint.


Wall color - Sherwin Williams in Propper Gray




Once the walls and trim were done, it was time to get started on the floor.  I read a ton of 'how to's' and pinterest articles and blogs and they were all different on how they did things.  I wanted to make sure this floor was super protected since it would be the doggie room.  I didn't want a drop of water to ruin the entire floor.  So, I primed the floor with an oil based floor primer I bought at HD for $23, I'm a bad blogger, I forgot to take a picture....

Even painted/primed white, the floor looked so much better than the original nastiness.

what a 180 degree change!
It took me a few weeks to decide on what the base color would be for the floor, it also took that long for me to decide on a pattern.  Since I had originally wanted tile floor, I again wanted the tile look and the only way I thought I could achieve that was to use a stencil.  I might as well tell you that at this point JD was home from his 3 months away and it was no longer a surprise, but instead a mess....sorry babe.

I found several designs I loved and reached out to my Facebook friends for their suggestions.  I thought I had a favorite picked out and then I started to think about the logistics of making it a stencil....um, way too may intricate details.

final four
I finally found a design that I liked that looked easy enough to replicate....hahahaha

and the winner....not any of the four
I have a  Silhouette Cameo and I tried my hardest to use it to cut the design onto it's brand stencil material, but since I didn't have a good clean picture it would recognize it.  I ended up buying stencil material from Hobby Lobby, 4 sheets for $4, not a bad price.  I used an x-acto knife to make the cuts, pretty easy since I chose a much simpler design.

I let JD pick the base color and he chose a dark navy color that looks really good.

We used this for the both the navy and the white

Valspar in Fairmont Penthouse Mos Blue


And we decided on a white for the stencil color.

Now onto stenciling....it started off easy enough, and then I started to get paint on the backside of the stencil.  Enter baby wipes (these are amazing at cleaning wet oops-I-missed spots).  I soon realized that I had to clean off the stencil EACH and EVERY time I stenciled the design...that's when I realized this was going to take a while.  I had a large piece of foam board that I used as a make shift cleaner surface in hopes of the making the process go a bit quicker than if I were to run to the kitchen each time.  I guess it help, because 10 days, 4 stencils, 2 X-Acto knife blades, 1 package of baby wipes, and 4 stencil brushes later, it was done.


all nice and clean



not too shabby looking

Stencil color - Valspar in Woodlawn Dewkist


this look says it all...



 Once the stenciling was completed, I celebrated!!! whoohooo!! haha, I wish, next up, floor sealing.  Again, lots of research went into this as well since I was worried the previous 3 layers of paint wouldn't be enough to stand up to our 3 dogs.  

I decided to go with Rust-O-Leum's Verathane sealer for high traffic areas.  Now, they have a different one that is just for floors, but for some reason the 'high traffic' aspect of this sealer spoke to me...I don't know, maybe I was delirious after the 10 days of non-stop stenciling...







and there you have it, all done!
Three coats of sealer later and I can officially say it is finished!  Ok, maybe I'm jumping the gun a bit....I still need to do floor trim around the edges.....and fix the rusty sink....but that's another story for another day.

Oh, my apologies, JD wasn't available again to proof, so there are probably several errors...









SaveSave

6 comments:

  1. My husband and I are thinking of redoing our dining room with plywood floors. If you had to do it again would you paint the planks before laying them down? Or still nail them down and then paint. Thanks!

    ReplyDelete
    Replies
    1. I would probably paint them the say way. They might last longer if painted prior, just because you would have painted the edges too, but I would leave the pattern painting until the end. If that makes sense?

      Delete
  2. Brooke, is there a possibility of getting a copy of the image you used for the stencil? I've been looking for a simple one & have fallen in LOVE with your design. You did a great job!

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. Hi! I'd love a copy of the stencil also! It's exactly what I need. Thanks!

    ReplyDelete

 
Life in the Big House Blog Design by Ipietoon